40/6, Gariahat Road(South), 1st Floor, Kolkata-700031, India
Phone:- +91 33 2499-0405 /
0406 / 2429 8208
Fax:- +91 33 24144457
ELECTRO STATIC PRECIPITATOR (E.S.P)
Soil & Enviro make Electro Static Precipitator (ESP) is the most efficient equipment applicable in the field of Industrial Air pollution control. It has wide range of applicable in the field of Power, Cement, Steel, Sponge Iron, etc. the efficiency of operation may reach 99.9% in ideal conditions.The Electro Static Precipitator consists of high voltage (H.T.) Emitters, which ionizes dust particles to the charged and ultimately get collected the “Collecting Plates”.
SEIPL’s Bag Filter is a fabric filter with fully automatic bag cleaning by compressed air pulses. It serves for the dry separation of dust from exhaust air or waste gas. The SEIPL’s Bag Filters are vividly useable in the Sponge Iron Industries, as these industries have havoc problem for the air pollution. There are two types of Bag Filters available ON LINE and OFF LINE Bag Filters. They differ due to some of their unique characteristics; those are discussed late for your better understanding.
SEIPL Heat Exchangers are supplied as pre0assembled units for easy and fast installation. The reliable and proven gas cooling technology allows use of recovered heat for drying, combustion etc
The SEIPL scrubber with a multi-venturi deck and mist separator for a horizontal gas flow. It provides the maximum flexibility of system layout since the multi-venturi deck is effective for either a vertical or horizontal gas flow. Manually or idiomatically adjustable decks are available for applications where variations in flow rates are expected.
The SEIPL Moisture Separator is used between Venturi Scrubber and ID Fan, to separate the water particles/droplets 12out of the gas that comes through the Scrubber.
WET CYCLONIC SCRUBBER
Wet Fan Scrubbers are ideal for medium energy scrubbing applications. These types of units provide virtually maintenance free service. Fine dust particles are captured by a self-cleaning wet fan providing overall collection efficiency of 99% + for particles larger than 1 micron.
SEIPL”s Cyclones are available in carbon steel stainless or high alloy construction.15 Refractory and /or ceramic lined units are also available for abrasive/high temperature applications. For efficient system design and operation it also necessary to consider dust characteristics such as sickiness, abrasiveness flow ability, explosiveness, etc. as well as airflow fluctuations, corrosion problems, dew point and structural design of the equipment. The engineers at SEIPL offer
The Bypass Damper is used in between Heat Exchanger and Bag Filter or ESP. If the gas is not suitable to go in to the bag filter for any cause, then their must be a way to put the gas out to the chimney, to protect the filter bags. Because the filter Bags are made to persist a certain temperature, if that exceeds, the bags may get damaged.
INDUCED DRAFT & FORCED DRAFT FANS
Our ID Fans and FD Fans are manufactured by the highest standard of quality. We supply the best suitable Fans to the plants as per their requirement. Some of the features are given hereunder
The Screw Conveyor is used with RAV (rotary Airlock Valve). The Screw Conveyor takes the separated dust for disposal.
We are providing Rotary Airlock Valve from Size of 150×150 to 800×800 for using under ESP/ bag Filter Hopper. To leak proof the equipment the gap between Rotor & Body is 1.0 mm & this gap can be adjusted by adjustable tip